Rifle Scope Using Tips, Rifle Scopes, Riflescope Tips

Rifle Scope Tips: How to Sight in a Rifle Scope

How to Sight in a Rifle Scope

Rifle Scope Tips: How to Sight in a Rifle Scope

Rifle owners recognize specifically just how seriously important it is to properly utilize a rifle scope. Generally referred to by short as “glass”, a rifle scope is used to see far-off targets and also surrounding items amplified to appear closer. Several scopes are also made to identify a potential bullet’s point of influence. When made use of effectively, rifle scopes give safer and also much more exact capturing in the field.

Scope Terminology

Novices trying to investigate the right scope for their rifle may encounter a baffling selection of terms. To efficiently use a rifle scope, it is essential to understand its vital components.

Body – Often called “television”, this is the diameter of a rifle scope. One inch or 30mm are common dimensions.

Adjustment knobs— on rifle scopes, handles come in a range of kinds, including turrents, level suggestion screws, or finger pressure handles that are gotten used to change elevation as well as windage.

Elevation – Similar to it seems altitude describes the vertical– or up and down– movement of the prospective bullet’s trajectory.

Windage – Regardless of its resource, windage describes horizontal– or left and also right– the activity that would certainly affect the possible bullet’s trajectory.

Reticle – Rifle scopes included a range of reticle designs, consisting of mil dots and crosshairs. The reticle is made use of to approximate the touchdown point of a prospective bullet. Some intricate reticles use lines to make up for bullet decrease or other environmental elements. Some reticles are illuminated through battery or by using ambient light.

How to Sight in a Rifle Scope-1

Eye Relief – this term refers to the scope between the shooter’s eye and also the leans at the backside of the scope. Eye relief is calculated by measuring the maximum distance that the shooter can see a full crisp view with no dark ring around the edges. Proper eye alleviation distances are an important safety and security factor in avoiding eye damages triggered by high recoil qualities.

Sites – often described as iron sites, these are 2 metal signs literally installed on the shaft of the rifle to attend to an estimate of the course of traveling for a potentially fired bullet. These generally do not offer the accuracy of change adaptability used by a lensed rifle scope.

Parallax – Some modern rifle scopes are equipped to measure parallax, a term that refers to the optical difference between the view presented in the scope and the reticle. By adjusting the rate of parallax, the reticle can be precisely brought into optical focus on the intended target.

Waterproof/FogproofQuality rifle scopes are sealed with O-rings to provide waterproof protection. Some rifle scopes are classified as fogproof, which means they have been filled with nitrogen. Fogproof and waterproof scopes can be immersed in water and remain completely dry, and thus are reliable in all weather conditions. Hope this post could help you understand How to Sight in a Rifle Scope, if any questions, feel free to contact us.

Power – Rifle scopes are often identified by their power of magnification, referring to how many times the view through the scope has been enlarged. The magnification power of scopes is usually expressed by two numbers, such as 4×32. This simple notation means that the scope in question has the ability to magnify a viewed object from four to 32 times its original size.

Optical coatings – some rifle scope lenses are treated with special coatings to help adjust for brightness and the ability of the scope to gather light, allowing for higher contrast and brighter images. Coatings are described as:

  1. Coated = A single layer on at least one lens surface.
  2. Fully Coated = A single layer on all air-to-glass lens surfaces.
  3. Multi-Coated = Multiple layers on at least one lens surface.
  4. Fully Multi-Coated = Multiple layers on all air-to-glass surfaces.

Scope Basics

How to Sight in a Rifle Scope-2

The purpose of the scope is to allow shooters precise information as to where any potentially fired bullet will land. After a scope has been mounted to the rifle, the first step is to “zero” the scope or to adjust various alignments until it provides accurate information. Key information about the bullet’s caliber, velocity, and weight is then used to make precise calculations to adjust the scope for maximum accuracy. Hope this post could help you understand How to Sight in a Rifle Scope, if any questions, feel free to contact us.

Additionally, various environmental factors must be taken into consideration, including elevation, shot angle, humidity, windage (horizontal air movement), and the presence of a head or tailwind, to compensate for the bullet’s trajectory. The distance to the ground as well as the ground temperature compared to air temperature can be used to calculate bullet lift or drop.

Once parallax has been used to make precise adjustments, the range can be accurately compensated for. Finally, the reticle of the rifle scope is placed on the intended target at your zero distance. Done correctly, the rifle scope is now ready to provide accurate guidance in achieving precise targeting.

Looking to purchase a rifle scope? A common rule of thumb is that a rifle scope should cost approximately half of what the rifle itself did, although recent advances in precise machining have led to a drop in prices.


It is extremely important to follow all local, state, and federal laws while shooting. Many laws on firearms and scopes can change drastically from state to state, or even between different counties and cities. Check with the mandated jurisdictional authority for further guidance in the legality and applicable guidelines and restrictions for using scopes in your area.

As all experienced rifle owners know, firearms have the potential to be lethal or cause serious injuries. Rifles and scopes should only be used by potential shooters who are well educated in the safe handling and use of firearms. Hope this post could help you understand How to Sight in a Rifle Scope, if any questions, feel free to contact us.

Sighting In Your Scope

Most scopes are not adjusted properly out of the box, so additional adjustments will need to be done, depending on distance, velocity, wind, ballistic coefficient, and much more. Sighting in scope requires precision and patience on the shooter’s part. Hope this post could help you understand How to Sight in a Rifle Scope, if any questions, feel free to contact us.

The scope must first be bore-sighted at 100 yards before making any other adjustments at the range. Bore sighting simply means adjusting the scope to where the bullet would hit the center of the crosshairs at a given distance, given the bullet has a perfectly flat trajectory. In reality, bullets do not have a flat trajectory, mainly because of gravity. Once the scope has been boring sighted at 100 yards, take a trip to a shooting range that has a distance of at least 100 yards. Some ranges are only for a short distance, so going to an appropriate location in the mountains would be the best alternative. While taking this trip, bring a portable shooting bench rest. Distances should be accurately measured, rather than eyeballed.

First setup a large paper target at a 25-yard distance, preferably one that already has a bull’s eye. Before making any shots, get very comfortable with both the rifle and shooting bench. Any muscle tension or movement can easily throw-off a bullet. The best method is to avoid as much human contact with the rifle as possible. Pillows and folded blankets can make a big difference in comfort-ability. Use sandbags to rest the rifle on the shooting bench. Cat litter bags are a great alternative for those who cannot obtain sandbags. Hope this post could help you understand How to Sight in a Rifle Scope, if any questions, feel free to contact us.

While looking through the rifle scope, adjust it to where there is a clear image. Interestingly, the level just below the maximum magnification level is usually the clearest. Once a round is chambered and the crosshairs are over the bull’s eye, close the eyes for a good 10 seconds then open them. If the crosshairs moved from the target, then it means that there’s still muscle tension in the shooter. Find a comfortable position and keep doing this until the crosshairs don’t move.

Finally, fire a shot into the target once everything is lined up. It’s important to gently pull the trigger rather than suddenly tug it. Tugging at the trigger can throw off a shot. If the rifle moved while firing, then do it again. After firing a well-aimed shot, inspect the target to see where the bullet went. Sometimes, a person may be able to see the bullet hole through their scope, but they should definitely see it through a spotter scope. More than likely, the bullet won’t hit dead center on the target. However, it should hit somewhere on the target. Measure where the bullet hole is in respect to the bull’s eye and write it down. For instance, a miss that is three inches low and two inches to the right.

To make up for this, adjust the clicks on the scope according to the instructions. For example, if it says that one click moves the center one-fourth of an inch at 100 yards, then multiply the number by four since the distance is only 25 yards. In the case where the bullet hit three inches low and two inches to the right, the person would want 48 clicks up and 32 clicks left. After everything is adjusted, take another shot at the target. Keep repeating this process until the bullet hits the center of the target. However, it doesn’t have to be a dead-center shot since the next step will be at 100 yards. If for some reason the bullet keeps missing the target, make sure that the scope is tightly mounted on the rifle, as this can dramatically affect shot placement.

Once everything is aligned at 25 yards, move the paper target out to 100 yards. Again, it’s important to actually measure it with some type of device. Repeat this very same process at the 100-yard mark, but wait until the rifle barrel has cooled down to ambient temperature, as barrel temperature may affect accuracy by causing more barrel harmonics. The wind is another factor to take into consideration. However, the wind is a changing variable, so it would be wise to write down the click adjustments when there’s no wind. Doing so will allow one to easily adjust the scope while wind factors change.

For really long-range shooting, it’s best to have the bullet impact around three inches above the bull’s eye. This higher impact point will compensate for the bullet drop at longer distances, such as 300 or more yards. It also prevents the shooter from having to aim above the target. Keep in mind that different ammunition will give different trajectories. For instance, a lighter, faster bullet will have a flatter trajectory at relatively shorter distances but a lower trajectory at longer distances. On the other hand, a heavier, slower bullet will have a lower trajectory at shorter distances but a flatter trajectory at longer distances. Hope this post could help you understand How to Sight in a Rifle Scope, if any questions, feel free to contact us.

In general, it’s best to stick with one particular type of ammunition, whether it’s factory or reloaded ammunition. Keeping one type of ammo will allow one to fine-tune their accuracy. Once everything is adjusted, one will be able to shoot long distances without having to worry much about bullet drop. A scope has two main advantages. It allows one to see objects at longer distances in much greater detail. Two, it allows the person to compensate for bullet drop, which can’t accurately be done with iron sights. Keep in mind that scope adjustments are mainly up to the person’s liking. For instance, one doesn’t necessarily need to have the bullet impact a few inches higher at 100 yards.

Adjustments in the Field

Military snipers use elaborate methods for determining precise environmental conditions such as humidity and exact wind speeds to zero their scope in the field. For most outdoor shooters, it’s often wiser to use the reticle based on approximations of environmental conditions. Depending on the selected bullet, the zero range may cause the bullet’s point of impact to travel through the reticle location in the scope’s view.

Our Top Rifle Scope Picks

T-Eagle ER5-20x50SFIR Hunting Side Parallax Riflescope

You don’t have to search high and low if you are after a quality rifle scope that covers all the basics that a good deer hunting scopes can accomplish. All you need is to get your hands on the T-Eagle ER5-20x50SFIR.

This is the best rifle scope for whitetail deer hunting. Taking pride in its functionality, it doesn’t believe in flair. It is a scope that grants its user simplicity and 100% quality.

Based on aviation aluminum ally material it is made of CNC precision machining to make the product lighter and more durable. The overall performance has been improved, and the factory has passed strict seismic tests and tests in various harsh environments.

This scope comes with full-wideband coating for eyepieces and objectives Also known as an antireflection coating. Observations at different angles will present different Ribbon(this is the performance of multi-layer coating)Good imaging, high definition, and high color reproduction.

Additionally, the T-Eagle ER5-20x50SFIR also has an Etched Reticle Reset. Whether the scope is not in use or is out in the most unforgiving environment, it is capped for protection. For protection against the environment, it is fully fog-proof and waterproof for coverage against unavoidable accidents during hunting season. These accidents can range from a sudden drop from a tree or a quick submersion into mud and puddles. Overall, this is a smart buy.

In Conclusion

Now, you have known How to Sight in & Use a Rifle Scope. For more rifle scope news, kindly check our other blogs. If any questions, feel free to contact us, we will reply to you in 24 hours.

T-Eagle always offers high-quality rifle scopes at a friendly price, our mission is to provide you with an excellent shopping experience. If you have a large order and also other concerns, please do not hesitate to contact us, we will reply to you in 24 hours. Many thanks for shopping with us!

Leave a Reply

Your email address will not be published. Required fields are marked *